Fujitsu ORACLE SPARC M10-1 商品構成 型番: SPMAEAA1ES

CPU: SPARC64 4Core ライセンス

MEM: 64GB 4*16GB PC3L-12800R

HDD: 2*600GB

Power Supply: 2*PowerSuplly XSCF>
XSCF> reso restorefa efack defaults -c factory WARNING:
If this system does not have BACK UP, this command will set all the user
settable XSCF configuration parameters to their default value as they
were set when the system was shipped out.
Furthermore, this command will delete all logs in the intended chassis XSCF.
Check the man page of this command before you run it. Continue?[yes/no](default no):yes
You must check the following points. 1. Have the ability to power cycle the system.
2. Have access to the serial console and hold the serial console of the
XSCF to confirm the completion of the command. If you answer "yes" this command will HALT the XSCF when it completes.
You will need to power cycle the system after the XSCF BOOT STOP. Do you really want to continue? Continue?[yes/no](default no):yes
The initialization of XSCF will be started.
XSCF : all data clear (exclude SYSTEM ID data)
BACK UP : all data clear (exclude SYSTEM ID data)
XSCF will be automatically rebooted. Afterwards, XSCF will be initialized.
Continue?[yes/no](default no):yes
Disabling IDIAG prompt complete
Setting FRUID-ROM to writable complete
Backup common DB complete
Syncing file systems... complete
XSCF shutdown request was completed.
XSCF>
XSCF> initiate_remotestorage_watch.sh -- complete
initiate_patroldiag.sh -- complete
ready_check.sh -- complete
multi_set_system_scf_ready.sh -- complete
checkbrand.sh -- complete
snmpwatch.sh -- complete
snmpd.sh -- complete
settmpnetwork.sh -- complete
cli_scf_ready_after_setting.sh -- complete
sleep_master.sh -- complete
snmpproxy.sh -- complete
setting_remcs_conf.sh -- complete
service syslog-ng -- stop
Stopping syslog-ng: [ OK ]
init_script2 -- complete
cli_ntp_setting.sh -- complete
cli_network_setting.sh -- complete
service iptables -- stop
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT: nat filter [ OK ]
iptables: Unloading modules: [ OK ]
service network -- stop
Shutting down loopback interface: [ OK ]
service crond -- stop
Stopping crond: [ OK ]
service xinetd stop
Stopping xinetd: [ OK ]
init_script -- complete
-- complete stop (spinit)
mainte_dbcopy.sh -- complete
tracerotate.sh -- complete
init -- complete
init: console main process (3387) killed by TERM signal
Entering non-interactive startup
-- process stoped (spinit)
Sending all processes the TERM signal... [ OK ]
Sending all processes the KILL signal... [ OK ]
Saving random seed: [ OK ]
Sync file systems
Unmounting file systems: [ OK ]
mount: /dev/shm not mounted alre[ 1648.007306] ff72e000: 00000000 00010000 00000000 00000000
[ 1648.073013] ff72e010: 00000000 00000000 00000000 00000000
[ 1648.138685] ff72e020: 00000000 ff8d00f8 00000020 00008008
[ 1648.204358] ff72e030: 00000000 007f0003 007f0003 00000000
[ 1648.270038] ff72e040: 05f30000 10101010 00000000 00000000
[ 1648.336828] Starting new kernel
setup_arch: bootmem
mpc85xx_rdb_setup_arch()
arch: exit

[ 1675.198564] ===== DEBUG =====
[ 1675.233149] FMEM bank/reset : a000
[ 1675.278854] timeout control : 004f
[ 1675.324638] =================
1.FMEM(NAND) Test >> OK
Booting : [1/1]
Starting udev: [ OK ]
Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
SP-FIRM start
mount_phram.sh -- complete
log_write_reduce.sh -- complete
kexec_setting -- complete
tracerotate.sh -- complete
USB-SSD Test >> OK
remount_usbssd.sh -- complete
ssd_db_check -- complete
FACTORY mode clear : start
FACTORY mode clear : sun_setdefault complete
FACTORY mode clear : sun_initdbs complete
FACTORY mode clear : REMCS initialization complete
FACTORY mode clear : SPI-FMEM clear complete
Initializing COMMON_PANEL.db DUAL.db FIRMUP.db... complete
Removing FRU.db... complete
Removing SETUP*.db... complete
FACTORY mode clear : XSCF DB clear complete
FACTORY mode clear : restore user accounts from default settings complete
FACTORY mode clear : BACK UP DB clear complete
FACTORY mode clear : NRCI initialization complete
Cleaning under /data/log/sync recursively... complete
Cleaning under /data/log/nosync recursively... complete
Cleaning under /data/log/process_down_log recursively... complete
Initializing SCF log... complete
Cleaning under /data/apcs recursively... complete
Cleaning under /data/log/monitor_log recursively... complete
Cleaning under /data/audit recursively... complete
Cleaning under /data/sptrace_backup recursively... complete
Cleaning under /data/var recursively... complete
Cleaning under /data/vboot recursively... complete
Cleaning under /data/nrci recursively... complete
Removing whole /data/md_store... complete
Removing whole /data/firm/cmu... complete
Removing whole /data/firm/obp... complete
Removing whole /data/firm/pcibox... complete
Removing /data/panel_fru.flg... complete
Removing /data/procdown_info... complete
Removing /data/var/sp/home/.ssh/authorized_keys.*... complete
Removing /data/tmp/ntp/peerstats*... complete
Removing /data/tmp/ntp/loopstats*... complete
Removing /data/var/sp/home/.bash_history... complete
Removing /data/var/sp/home/.lesshst... complete
Cleaning under /var/log recursively... complete
Cleaning under /sp/log/core recursively... complete
Cleaning under /root/.ssh recursively... complete
Removing /sp/log/monitor.log*... complete
Cleaning /hcp0/usr/local/ssl/servercert.pem... complete
Cleaning /hcp0/usr/local/ssl/serverkey.pem... complete
Cleaning /hcp0/usr/local/ssl/csr.pem... complete
Cleaning /hcp0/usr/local/ssl/cert.pem... complete
Cleaning /hcp0/etc/pki/CA/... complete
Cleaning /hcp0/etc/ssh/ssh_host_key.pub... complete
Cleaning /hcp0/etc/ssh/ssh_host_key... complete
Cleaning /hcp0/etc/ssh/ssh_host_rsa_key.pub... complete
Cleaning /hcp0/etc/ssh/ssh_host_rsa_key... complete
Cleaning /hcp0/etc/ssh/ssh_host_dsa_key.pub... complete
Cleaning /hcp0/etc/ssh/ssh_host_dsa_key... complete
Cleaning /hcp0/etc/localtime... complete
Cleaning /hcp0/etc/ntp/drift... complete
Cleaning /hcp0/etc/pam_ActiveDirectory.conf... complete
Cleaning /hcp0/etc/pam_ActiveDirectory/... complete
Cleaning /hcp0/etc/pam_ldapSSL.conf... complete
Cleaning /hcp0/etc/pam_ldapSSL/... complete
Cleaning /hcp0/sp/etc/bash_history... complete
Cleaning /hcp0/sp/tmp/... complete
Cleaning /hcp1/usr/local/ssl/servercert.pem... complete
Cleaning /hcp1/usr/local/ssl/serverkey.pem... complete
Cleaning /hcp1/usr/local/ssl/csr.pem... complete
Cleaning /hcp1/usr/local/ssl/cert.pem... complete
Cleaning /hcp1/etc/pki/CA/... complete
Cleaning /hcp1/etc/ssh/ssh_host_key.pub... complete
Cleaning /hcp1/etc/ssh/ssh_host_key... complete
Cleaning /hcp1/etc/ssh/ssh_host_rsa_key.pub... complete
Cleaning /hcp1/etc/ssh/ssh_host_rsa_key... complete
Cleaning /hcp1/etc/ssh/ssh_host_dsa_key.pub... complete
Cleaning /hcp1/etc/ssh/ssh_host_dsa_key... complete
Cleaning /hcp1/etc/localtime... complete
Cleaning /hcp1/etc/ntp/drift... complete
Cleaning /hcp1/etc/pam_ActiveDirectory.conf... complete
Cleaning /hcp1/etc/pam_ActiveDirectory/... complete
Cleaning /hcp1/etc/pam_ldapSSL.conf... complete
Cleaning /hcp1/etc/pam_ldapSSL/... complete
Cleaning /hcp1/sp/etc/bash_history... complete
Cleaning /hcp1/sp/tmp/... complete
FACTORY mode clear : cleaning log files on XSCF complete
Cleaning under /ssd/apcs recursively... complete
Cleaning under /ssd/core_save recursively... complete
Cleaning under /ssd/fer recursively... complete
Cleaning under /ssd/rsync_cache recursively... complete
Cleaning under /ssd/snapshot recursively... complete
Cleaning under /ssd/snapshot_col recursively... complete
Cleaning under /ssd/vboot recursively... complete
Cleaning under /ssd/nrci recursively... complete
Removing whole /ssd/md_store... complete
FACTORY mode clear : cleaning files on USB-SSD complete
FACTORY mode clear : syncing file systems... complete
FACTORY mode clear : complete Please turn off the breaker after XSCF halt. setdefaults_boot -- complete
mainte_dbcopy.sh -- complete
tracerotate.sh -- complete
init -- complete
init: rc3 main process (1422) killed by TERM sig
localhost login: Entering non-interactive startup
-- process stoped (spinit)
Sending all processes the TERM signal... init: console main process (4081
localhost login: Sending all processes the KILL sinit: console ma
localhost login: Saving random seed: [ OK ]
Sync file systems
Unmounting file systems: [ OK ]
mount: /dev/shm not mounted already, or bad opti[ 2136.088602] ff72e000: 00000000 00010000 00000000 00000000
[ 2136.154287] ff72e010: 00000000 00000000 00000000 00000000
[ 2136.219967] ff72e020: 00000000 ff8d00f8 00000020 00008008
[ 2136.285654] ff72e030: 00000000 007f0003 007f0003 00000000
[ 2136.351329] ff72e040: 05f30000 10101010 00000000 00000000
[ 2136.418411] Starting new kernel
setup_arch: bootmem
mpc85xx_rdb_setup_arch()
arch: exit

[ 2061.745486] ===== DEBUG =====
[ 2061.780061] FMEM bank/reset : a000
[ 2061.825772] timeout control : 00cf
[ 2061.871557] =================
1.FMEM(NAND) Test >> OK
Booting : [1/1]
REBOOT: BOOT STOP (recover by NFB-OFF/ON)
(reason=0x02 counter=0 threshold=0 bupmem_counter=0 factor=a00000cf)
[
靱elcome to System Control Facility Module Version 2350
Copyright (c) 2011-2012 FUJITSU LIMITED, All Rights Reserved.
Diagnostics : 1.CPU Register Test >> OK
2.L2 Cache Test >> OK
3.RTC Low Battery Test >> OK
4.SDRAM Test >> OK
5.RTC Operation Test >> OK
6.SPI-FMEM Test >> OK
Booting : [06/06]
Loading file "/boot1/uImage" from mmc device 0:1 (xxa1)
2618168 bytes read
Loading file "/boot1/initramfs_image" from mmc device 0:1 (xxa1)
3122382 bytes read
Loading file "/boot1/p1011scf.dtb" from mmc device 0:1 (xxa1)
8192 bytes read
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-2.6.36.2
Created: 2017-11-30 1:04:25 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 2618104 Bytes = 2.5 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
Image Name: Initial ramdisk for Service Proc
Created: 2017-11-30 1:05:08 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 3122318 Bytes = 3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0xc00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 17b62000, end 17e5c48e ... OK
Loading Device Tree to 00ffb000, end 00ffffff ... OK
setup_arch: bootmem
mpc85xx_rdb_setup_arch()
arch: exit

[ 0.420730] ===== DEBUG =====
[ 0.455282] FMEM bank/reset : a080
[ 0.501010] timeout control : 000f
[ 0.546801] =================
7.FMEM(NAND) Test >> OK
Booting : [6/7]
Starting udev: [ OK ]
Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
SP-FIRM start
mount_phram.sh -- complete
log_write_reduce.sh -- complete
kexec_setting -- complete
tracerotate.sh -- complete
USB-SSD Test >> OK
remount_usbssd.sh -- complete
SSD DB set default
ssd_db_check -- complete
setdefaults_boot -- complete
DMA_WA.sh -- complete
spdb-backup.sh -- complete
spdb-recovery.sh -- complete
dbinit -- complete
splog_sem_init -- complete
cli_db_create.sh -- complete
procdown_setting.sh -- complete
start /sp/bin/spdual (pid=1866)
start /sp/bin/multid (pid=1875)
-- complete (ACTIVE)
-- complete (MASTER)
-- BBID (0)
brand_id_get.sh -- complete
setup_defaultuser -- complete
um_restore_accountfile.sh -- complete
um_restore_configs -- complete
login_check -- complete
hub-ctl -- complete
sysctl -- complete
ad_restore_configs -- complete
ldap_regen -- complete
nsswitch_regen -- complete
xinetd -- complete
service iptables -- start
iptables: Applying firewall rules: [ OK ]
service network -- start
Bringing up loopback interface: [ OK ]
service crond -- start
Starting crond: [ OK ]
init_script -- complete
cli_network_setting.sh -- complete
cli_ntp_setting.sh -- complete
service syslog-ng -- start
Starting syslog-ng: [ OK ]
init_script2 -- complete
setting_remcs_conf.sh -- complete
snmpproxy.sh -- complete
start /sp/bin/emaild (pid=2432)
start /sp/bin/auditd (pid=2431)
start /sp/bin/rsyncd (pid=2430)
start /sp/bin/ipmid (pid=2479)
start /sp/bin/firmupd (pid=2478)
start /sp/bin/fuseqd (pid=2477)
start /sp/bin/sp_remcsd (pid=2506)
start /sp/bin/ferd (pid=2507)
start /sp/bin/rasd_slave (pid=2505)
start /sp/bin/rasd_master (pid=2504)
start /sp/bin/servicetag (pid=2518)
start /sp/bin/nrcid (pid=2517)
start /sp/bin/fnld (pid=2519)
start /sp/bin/hwcd (pid=2611)
start /sp/bin/seqd (pid=2610)
start /sp/bin/prid (pid=2838)
start /sp/bin/cmdds (pid=2860)
start /sp/bin/ttyds (pid=2861)
start /sp/bin/cmdd (pid=2859)
start /sp/bin/codd (pid=2888)
start /sp/bin/ttydm (pid=2887)
start /sp/bin/coremgrd (pid=2932)
sleep_master.sh -- complete
cli_scf_ready_after_setting.sh -- complete
settmpnetwork.sh -- complete
snmpd.sh -- complete
snmpwatch.sh -- complete
checkbrand.sh -- complete
multi_set_system_scf_ready.sh -- complete
ready_check.sh -- complete
initiate_patroldiag.sh -- complete
initiate_remotestorage_watch.sh -- complete
-- initialize complete (SCF_READY) localhost login: defaut^H^H^H^H/^H^H^C
localhost login: default
Change the panel mode switch to Locked and press return...
Leave it in that position for at least 5 seconds. Change the panel mode switch to Service, and press return...
XSCF>
XSCF> showlogs error
XSCF>
XSCF>
XSCF>
XSCF>
XSCF> testsb -v -p -s -a -y
Initial diagnosis is about to start, Continue?[y